This top-quality remote will clone the following Marantec 433,92MHz remote controls:
Marantec Digital 302
Marantec Digital 304
Marantec Digital 313
Marantec Digital 321
Marantec Digital 323
Command 131
And following Marantec old models:
Marantec Digital 211
Marantec Digital 212
Marantec Digital 214
Marantec Digital 221
Marantec Digital 222
Marantec Digital 224
Marantec Digital 231
Marantec Digital 232
Compatible only with Grey-Backed model 433.92MHz.
Do not confuse with Black-Backed model !!!
Description:
1. Self-learning remote control
2. Mainly apply garage door, rolling curtain, etc.
3. Copy most 433.92MHz fixed code remote controls
4. Learning Back to Back in few seconds
5. Battery included
Operating distance: 15 -130m (Depending on your Aerial)
Coding Mode: Fixed code
Frequency: Fixed frequency 433.92MHz
Battery Model: 27A
Voltage: 12V
How to clone your remote:
Please see this link for easy programming video:
https://www.youtube.com/watch?v=U5bkC1-KqdU
1) Click and Hold First and Second buttons together – Led will flash 3 times
2) Keep holding First button and release Second button ( keep holding First button since step 1 )
3) Push Second button 3 times, Led will start flashing Non-stop. ( Keep holding First button since step 1 )
4) Put both remotes Into Back to Back position ( II ) ! Make sure they have direct contact , touching, push a bit, to make them touch each other harder
5) Click and hold one button on your original remote and one button on your clone remote. Keep holding until led will make : 2 blinks > 3 blinks > Steady = Successfully cloned, only after the light goes into steady.
Note: you don’t need an access to you control board or receiver!!!
